Toyota TDI 4Runner Project - Diesel Conversion

After much consideration, I have decided to sell my TDI 4Runner diesel conversion. My current priorities are focused on growing my business ...

I used an aluminum circle track radiator and modified it to work. A few years after the below version was installed, a driver ran a red ligh...

Relay pin 30 - This is the largest terminal on the relay, and is wider than your normal sized spade connector. This is a fused 50a circui...

I used an AutoMeter Phantom 2 1/16th fuel gauge. As I expected, it was not compatible with the factory fuel level sender. I cut a new hol...

On past project vehicles, I have always wanted all aftermarket gauges, but never did due to cost. Early on I decided it was going to happen ...